News

Daily maintenance methods for high-altitude work safety belts

(1) Select safety belts that have been inspected and approved by relevant departments and have a “safety warning” mark on them.

(2) It is strictly prohibited to tie or continue the seat belt.

(3) To tighten the waist belt, the waist buckle component must be securely fastened.

(4) Work at heights of 2 meters or more (including 2 meters) must use safety belts.

(5) During use, it should be reliably hung in a secure place, hung high and used low, and prevented from swinging, avoiding open flames and stabbing.

(6) In places where it is not possible to directly hang safety belts, safety ropes, safety railings, etc. for hanging safety belts should be installed.

(7) It is prohibited to hang seat belts on components that are not secure or have sharp corners.

(8) Seat belts that have been severely impacted cannot be used even if their appearance remains unchanged.

(9) It is strictly prohibited to use safety belts to transfer heavy objects.

(10) The wearing and removal of seat belts must be carried out on a reference plane (such as the ground), and it is prohibited to wear and remove seat belts at a height of more than 2 meters.

(11) The safety belt must be tied to the safety rope within 2 meters for climbing. It is prohibited to tie it to a fixed object or safety rope only when climbing to a high place, to ensure that accidents occur during climbing and walking.

(12) When installing safety ropes at heights, double hook safety belts must be used to ensure full safety belt protection during high-altitude operations and movements; If it is not possible to install safety ropes on site, double hook safety belts must be used for high-altitude climbing, walking, or operations starting from the reference plane

News Categories

Recent Articles